20G Butterfly Positive Pressure Type Disposable Iv Cannula
Emergency Infusion/Blood Transfusion Pink
Positive pressure connector realizes needle-free connection to
avoid occupational risk for medical staff. Positive pressure
function can avoid blood backflow, prevent blockage and ensure safe
retention
Indwelling needles are left in the foot:
(1) Do not walk on the foot with the needle in place as much as
possible;
(2) Put clothes or soft pads between the legs to separate the feet
when sleeping to prevent the child's feet from stirring off the
needles;
(3) Elevate the limb with the indwelling needle slightly by 20 to
30 degrees when sleeping to prevent back bleeding.
Butterfly Positive Pressure Type Disposable Iv Cannula
Product Registration Certificate No.: National Machinery Note
Approval 20153151737
divided into two types, Y-A and Y-AZ.
| Type | Product Specifications | Flow Rate | Clinical Applications | Color |
Y-A(Butterfly type)
Y-AZ(Butterfly Positive Pressures type)
| 26G*0.63IN | 0.6*16mm | 10ml/min | Neonates and fine vessels | Purple |
| 26G*0.75IN | 0.6*19mm |
| 24G*0.75IN | 0.7*19mm | 19ml/min | Pediatrics/Neonatal Infusion | Yellow |
| 22G*0.75IN | 0.9*19mm | 33ml/min | Routine infusion for adults | Blue |
| 22G*1.00IN | 0.9*25mm |
| 20G*1.16IN | 1.1*30mm | 50ml/min | Emergency infusion/blood transfusion | Pink |
| 18G*1.16IN | 1.3*30mm | 70ml/min | Emergency Surgery | Green |
Hands with indwelling needles should not be immersed in water, and
when washing hands, avoid the area covered by the indwelling needle
patch;
Put a sock on the hand with the indwelling needle after the
infusion (turn the sock over when you put it on, because there are
threads inside the sock) to prevent the child from tearing off the
needle when playing.
Instructions for use:
1. medical personnel should check the package strictly according to
aseptic operation, and remove the product if it is well sealed and
not broken;
2. tighten the heparin cap (if any), remove the protective cap and
connect directly to the outer luer connector to drain the gas;
3. medical personnel rotate and loosen the needle tip protection
sleeve, pinch the catheter holder with one hand, turn the needle
handle slightly from side to side with the other hand, and then
reset it to prevent needle adhesion;
4. hold the needle holder flap so that the syringe blade is facing
upward at an angle of 15-30 degrees, puncture the vein straight and
feed the needle slowly;
5. carefully observe the return of blood at the lateral hole of the
needle core, depress the angle after seeing the return of blood,
continue to enter the needle for 2 mm, hold the catheter holder in
the left hand and withdraw the steel core about 5 mm with the right
hand;
6. Hold the needle holder and feed the steel needle core and
catheter together all into the vessel, and withdraw the steel
needle core. Do not re-insert the steel needle into the catheter to
avoid damage to the catheter. Put the withdrawn steel needle into
the special apparatus;
7. Adjust the infusion flow rate by applying a transparent
dressing.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Q: Where is your factory located? How can I visit there?
A: Our factory is in Wuzhong District, Suzhou City, Jiangsu
Province, and all our customers, both domestic and foreign, are
warmly welcome to visit our factory
Q: Are you a factory or a trading company?
A: We are a large factory integrating R&D, production and
sales.
Q: When can I get the price?
A: Normally, we quote within 24 hours after we receive your
inquiry.
Q: Can you do OEM?
A: Yes, we do OEM, ODM and R&D. We can process products
according to the different needs of our customers.
Q: What is the delivery time?
A: According to the order quantity, it needs to be negotiated.
Q:If I want to order a small quantity, can you do it?
A: If you need products that we have in stock, that would be great
and you can choose goods that are in stock.We can put your order
together with our other customers' orders for production. But this
will require some waiting time.
Q:How will you track my order?
A:When the goods start production, we will take photos of the goods
and send them to you, if you find any production,defects, please
contact us to correct it. Throughout the production process, we
will keep in touch with you via email or instantinformation and you
can get the latest news about your order. After the goods are
completed, we will take pictures of the goods and pack
to you before shipping.
Q: How can I get a sample?
A: Please pay the sample cost and courier fee before we receive
your first order. We will return the sample cost to you on your
first order.
Q: Can you brand the products with our brand?
A: Some products can. We can put your Logo on the products and
packaging if you can meet our MOQ.
Q: Can you make products in our colors?
A: Yes, the color of the product can be customized if you can meet
our MOQ.
Q: How do you guarantee the quality of your products?
A:
1) Strict testing during the production process.
2) Strict sampling inspection of products before shipment, and make
sure the products are well packed.
